Closed-End Blind Rivets

Closed-end blind rivets feature a mandrel head that is protected by the closed end of the rivet to prevent the seepage of liquid or gas through the set rivet. POP closed end rivets are used where the adjoining back-plate cannot be accessed but must be kept weatherproof. Closed end blind rivets also provide a greater tensile strength and shear strength than open end rivets and are often preferred for electronics applications because the mandrel cannot fall into the work area.
Pop closed end rivets permanently join two materials by inserting the body of the rivet into a hole, then using a rivet tool to pull the mandrel, causing the body of the closed-end rivet to expand. The pressure of the tool eventually pops off the mandrel, leaving behind the secured rivet.
RC Fasteners provides countersunk closed-end blind rivets, dome closed end blind rivets and grooved dome closed-end blind rivets in various sizes and material options to meet your application requirements. View the product details below for more information and to place your order or contact us  for assistance with your fastener order.

Closed End Blind Rivets Are a Strong and Weatherproof Fastener Solution

Closed end blind rivets feature a fully enclosed mandrel end to prevent moisture or gas from seeping through the rivet and to prevent the broken off portion of the mandrel from falling into a component during installation. They provide a tight and secure seal and are fast and easy to install.
Your pop closed end rivets should be selected in the same material as your application components to ensure chemical compatibility, and in a grip range and diameter that matches the material thickness and the diameter of your drilled holes. If you are working with irregular or oversized holes, you may want to consider using a backup rivet washer to ensure a secure hold.

Alum/Alum Dome Closed-End Blind Rivets

These closed end dome head pop rivets feature an aluminum body and mandrel. The dome head is twice the size of the body diameter and is fully enclosed in the end of the rivet for applications involving gas or liquids. Aluminum provides corrosion resistance and is a lightweight material with lower tensile strength than steel.
  • Sizes: 4-2 to 6-10
  • Grip Ranges: 0.020-0.125 to 0.501-0.625
  • Diameters: 1/8, 5/32, 3/16
View the All Aluminum Closed End Blind Dome Head Rivets spec sheet for additional information.

Alum/Steel Countersunk Closed-End Blind Rivets

Aluminum countersunk closed end blind rivets with a self-contained steel mandrel with a head that is completely protected and secured within the closed end of the rivet. Countersunk closed-end rivets feature a flange that sits flush with the material surface after installation to provide a smooth finish. The aluminum body of this pop closed end rivet provides corrosion resistance and the steel mandrel provides high tensile strength.
  • Sizes: 4-2, 4-4, 6-4
  • Grip Ranges: 0.063-0.125, 0.188-0.250
  • Diameters, 1/8, 3/16 
View the Alum/Steel Countersunk Closed-End Blind Rivet spec sheet for additional information. 

Alum/Steel Dome Closed-End Blind Rivets

This aluminum closed end blind rivet features a self-contained steel mandrel and a slightly rounded head that is twice the size of the body diameter. Aluminum has a lower shear and tensile strength but provides corrosion resistance.
  • Sizes: 4-1 to 8-6
  • Grip Ranges: 0.020-0.125 to 0.501-0.625
  • Diameters: 1/8, 5/32, 3/16, 1/4 
View the Alum/Steel Dome Closed-End Blind Rivets Spec Sheet for additional details.

Stainless 304/Stainless 420 Grooved Dome Closed-End Blind Rivets

Grooved dome closed end blind rivets feature a grooved surface that provides superior grip for use with various materials. Features a stainless 304 body and stainless 340 mandrel. Stainless steel provides higher tensile strength and shear strength, resists corrosion and can withstand exposure to various chemicals and solvents.
  • Sizes: 4-2 to 6-10
  • Grip Ranges: 0.020-0.125 to 0.501-0.625
  • Diameters: 1/8, 3/16

Request a Quote for Wholesale Pop Closed End Rivets or Place Your Order Today

RC Fasteners offers closed end blind rivets and a range of other rivets and fasteners for use with a range of applications. Place your rivet order today or request a quote or contact us to learn more.